Rumah> Blog> Foil-Scrim Tape, Foil Tape, Insulation Material, Cnstruction Material

Foil-Scrim Tape, Foil Tape, Insulation Material, Cnstruction Material

May 01, 2024
Model NO.: YKS-012
Model NO.: YKS-012

Foil-Scrim Tape consists of:
1. Foil-Scrim backing (Foil: 25u / 2 Way Scrim: 5x5mm);
2. High performance adhesive;
3. Easy release silicone release paper.

Features:
Aluminum with Fiberglass Scrim backing provides excellent reflection of both heat and light.
High performance adhesive with moderate adhesion offers good sealing and bonding on Foil-Scrim Facing joints and seams in HVAC ductwork application.
Good aging resistance both indoors and outdoors.
Low moisture vapor transmission rate offers excellent sealing and patching performance.
Service temperature: Water Acrylic:-10 to 65ºC (+14 to +149ºF);
                                Rubber Resin: -20 to +80ºC (-4 to +176ºF);
                                Solvent Acrylic: -30 to +120ºC (-22 to +248ºF).

Backing Thickness: 100micron, Total Thickness: 130micron.

Typical Applications: HVAC industry for joining and sealing Foil-Scrim Facing laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

Product Forms & Size Available
Cut Roll: 48mm / 50mm (2") / 60mm / 63mm (2.5") / 72mm / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mmx45 / 50m                    Jumbo Roll: 1200mmx750m/800m

Important Note
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%;Width: ±3mm;Length: Cut Roll:±0.3m,Jumbo Roll:±0.5%
Storage & Shelf Life: 12 months when stored at 21ºC(70ºF)/50% relative humidity out of direct sunlight.
Surface Preparation: It is essential, as with all pressure sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants
Product Use: It is essential that the user evaluate the DeYou product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on DeYou products between +10~+40ºC(+50 ~ 105ºF).


Foil-Scrim Tape consists of:
1. Foil-Scrim backing (Foil: 25u / 2 Way Scrim: 5x5mm);
2. High performance adhesive;
3. Easy release silicone release paper.

Features:
Aluminum with Fiberglass Scrim backing provides excellent reflection of both heat and light.
High performance adhesive with moderate adhesion offers good sealing and bonding on Foil-Scrim Facing joints and seams in HVAC ductwork application.
Good aging resistance both indoors and outdoors.
Low moisture vapor transmission rate offers excellent sealing and patching performance.
Service temperature: Water Acrylic:-10 to 65ºC (+14 to +149ºF);
                                Rubber Resin: -20 to +80ºC (-4 to +176ºF);
                                Solvent Acrylic: -30 to +120ºC (-22 to +248ºF).

Backing Thickness: 100micron, Total Thickness: 130micron.

Typical Applications: HVAC industry for joining and sealing Foil-Scrim Facing laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

Product Forms & Size Available
Cut Roll: 48mm / 50mm (2") / 60mm / 63mm (2.5") / 72mm / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mmx45 / 50m                    Jumbo Roll: 1200mmx750m/800m

Important Note
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%;Width: ±3mm;Length: Cut Roll:±0.3m,Jumbo Roll:±0.5%
Storage & Shelf Life: 12 months when stored at 21ºC(70ºF)/50% relative humidity out of direct sunlight.
Surface Preparation: It is essential, as with all pressure sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants
Product Use: It is essential that the user evaluate the DeYou product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on DeYou products between +10~+40ºC(+50 ~ 105ºF).

Hubungi Kami

Author:

Ms. Yoki

Phone/WhatsApp:

+86 13567802005

Produk popular
You may also like
Related Categories

E-mel kepada pembekal ini

Subjek:
E-mel:
Mesej:

Your message must be betwwen 20-8000 characters

Hubungi Kami

Author:

Ms. Yoki

Phone/WhatsApp:

+86 13567802005

Produk popular
Blog News
Double-sided tape

March 11, 2024

Supply warning tape

March 11, 2024

Tapak Mudah Alih

Rumah

Product

Phone

Tentang kita

Siasatan

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Menghantar