ZCQF-type PTFE self-priming magnetic pump working principle, characteristics and main purposes

ZCQF self-priming magnetic drive pump (referred to as magnetic self-priming pump) is the permanent magnet coupling working principle for centrifugal pump of new products, reasonable design, advanced technology, with a sealed, non-leak , Corrosion-resistant features, its performance reached the advanced level of similar foreign products. Xiaobian now introduce the working principle, characteristics and main purposes of ZCQF PTFE self-priming magnetic pump. ZCQF type PTFE self-priming magnetic pump I. ZCQF type PTFE self-priming magnetic pump Working principle The pump adopts external mixed axial backwater pump body structure, the pump body consists of liquid suction chamber, liquid storage chamber, volute, backflow hole, Gas-liquid separation chamber and other components. After the pump is started, under the action of centrifugal force, the remaining liquid in the water absorption chamber and the air in the liquid inlet pipe are stirred into an air-water mixture by the impeller, and the mixture enters the gas-liquid separation chamber through the volute. As the speed slows down, Water is separated, the air is discharged from the liquid outlet of the pump, and the liquid is returned to the pump through the backwater hole. After multiple cycles, the air in the liquid inlet pipe is drained out to form a certain degree of vacuum in the pump to achieve the self-priming effect. Second, ZCQF-type PTFE self-priming magnetic pump Features 1, magnetic self-priming pump to replace the static seal seal, the pump over-current components in a completely sealed state, completely solve the other pump mechanical seal can not be run, , The drop of the disease, magnetic pump selection of corrosion-resistant, high strength reinforced polypropylene, PTFE, silicon nitride, carbon graphite, steel jade ceramic, as a manufacturing material, and the use of stainless steel connector for the customer to solve the old Frequent replacement of the coupling for ambient air corrosion and trouble. 2, that is, CQF-type magnetic drive pump function, but also set a self-absorption in one, without the end of the valve and irrigation, with self-priming performance, self-priming time is short, high efficiency, and can be in the case of no liquid And no-load operation, self-priming height of 4 meters, so it has good corrosion resistance, and can transport the media from pollution. Third, ZCQF-type PTFE self-priming magnetic pump Product Use Magnetic pump compact structure, good looks, small size, low noise, reliable operation, easy to use and maintenance. Can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, film and photographic printing, scientific research institutions, national defense and other units pumping acid, lye, oil precious precious liquid, venom, volatile liquids, and recycled water equipment, Rate matching. Especially easy to leak, flammable, explosive liquid pumping, explosion-proof motor use this pump is even more ideal. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)